TUNNEL WASHING MACHINE FOR CRATES AND PALLETS WITH BLOW-OFF, 600 pcs. crates/h, 2375340621

The machine is pass-through tunnel machine and is designed for washing and blowing off of crates 600х400х200 mm, 800х600х200 mm and H1 pallets 1200х800х160 mm. It consists of zones for pre-washing, washing and rinsing, disinfection and blow-off.


All processes are performed with hot water (45-60°С), which is provided by the customer. Pre-washing and washing processes are performed in identical way – by means of centrifugal pumps and adjustable (by hand) nozzles. Тhe tank for main washing is equipped with heat exchanger. It is used to keep the temperature of the washing solution in case when the incoming water is cold. After the rinsing the product is sprayed with water 90°С so it is thermal disinfected. The heating from 60 to 90°С is performed by a heat exchanger and an electrical in-line heater. Before entering the blow-off zone the crates are transported through the neutralizing zone. The blow-off is performed by high pressure centrifugal blowers and nozzles - air knives, which blow off the water of the products from all sides. The crates are transported with their bottom up, cross moving, and the pallets – with their feet down, by means of a special transporting system. The side guiders are so positioned, that no manual regulation is needed. The transport speed is smoothly adjustable. The motor is equipped with sliding connector to prevent eventual injuries to the personnel. The control panel is mounted on the left side of the machine, the electrical panel is separated. Two ventilation systems take the steams out. Safety switches are mounted on the side covers, so the machine stops automatically when they are opened. The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations
Technical data:
Аrt. numbers
 2375340621
Маx. capacity
 600 crates/h
Dimensions of product

crates 600х400х200 mm

crates 800х600х200 mm

pallets 1200х800х160 mm
Power supply
 400 V/3 Ph/50 Hz
Control voltage
 24 V DC
Installed power
 48 kW
Heated in the area of disinfection 2x9 kW
Drive 0.75 kW
Blowers blow-off 2х7,5 kW
Blowers ventilation 2х0,18 kW
Pump pre-washing 5,5 kW/50 m³/h/2,5 bar
Pump washing 7,5 kW/60 m³/h/3,5 bar
Hot water inlet min. 3 bar
Water outlet
 DN50

 

Dimensions:
Length
 10845 mm
Width
 1795 mm
Height
2287 mm

 

 

 
βίντεο