Washing Machine for Crates and Boxes with Blow-off Zone 20.0202.12


The machine is tunnel and is designed to clean crates 400х600х140-240 mm and boxes with dimensions 400x300x120-150 mm, 210x350x140 mm, 200x300x150 mm, 240x150x125 mm, 103x167x75 mm. It consists of zones for washing and rinsing and blowing-off.

The washing is performed by means of centrifugal pump and adjustable (by hand) nozzles. The washing agent is added manually in the tank before starting the machine (option – automatic dosing system). The tank is equipped with manually cleaned filter for catching the bigger soils. The water for washing can be heated by means of electric heaters or a injector for direct steam. The desired water temperature can be adjusted between 30-60°C via thermostat. For the rinsing is used general water supply. After the rinsing this water is used also for refreshing and additional filling of the washing tank.

          In the last zone high pressure blowers and air knives blow off the water from all sides of the crates.

 

The crates are placed with their bottom up and the small boxes – in special stainless steel baskets (4 pcs.). They are transported through the zones by a motor driven wire belt. The transport speed is smoothly adjustable The gear motor is equipped with sliding connector to prevent eventual injuries to the personnel.

On client’s request the machine is equipped with ventilation (option).

         The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations.

Technical data:
Max. capacity
240 crates/h
Dimensions of the products

400х600х140-240 mm, 400x300x120-150 mm,

210x350x140 mm, 200x300x150 mm,

240x150x125 mm, 103x167x75 mm

Power supply
400V/3Ph/50Hz
Control voltage
24 V DC
Installed power
31 kW
Heating
2x11 kW
Drive
0,25 kW
Blowers
2х2,2 kW
Pump 4 kW/33 m³/h/3 bar
Adjustable washing nozzles
38 pcs.
Tank volume
320 l
Water inlet
min 3 bar
Water outlet
Ø50

 

  
Dimensions:
Length
4635 mm
Width 1245 mm
Height
2110 mm

 

Video